Pool Tile Replacement
Full retile jobs with modern glass, porcelain, or ceramic tile — waterline, walls, steps, and full pools.
Typical project range: $2,500 - $12,000
Pool tile replacement is a step up from spot repairs — and usually the right call when damage is widespread or when you want a visual refresh that a 1960s blue diamond-brite just can’t deliver anymore. We handle everything from waterline-only retiles (the most common Orlando job) to full pool retiles with custom glass and mosaic work.
Waterline retile vs. full pool retile
- Waterline retile: just the band of tile at the water’s edge (typically 6 inches tall) gets replaced. This is 80% of the replacement work we do in Orlando. Cost: $2,500-$5,500 for a standard residential pool.
- Full pool retile: every surface gets new tile — walls, floor (if tiled), steps, benches. Much bigger project, typically done as part of a full pool remodel. Cost: $8,000-$20,000+.
Tile options for Central Florida pools
- Porcelain — the Central Florida waterline standard. Dense, low-water-absorption, holds up to Orlando’s calcium and freeze cycles. Best value per square foot.
- Glass tile — premium, modern look, excellent calcium resistance, reflects light beautifully. Higher cost but increasingly common in Orlando remodels.
- Ceramic — budget-friendly, wide selection, good for standard residential work.
- Stone and travertine — natural look, often used for coping and accent bands.
- Custom mosaics — logos, family crests, decorative inlays on steps and floor.
Our replacement process
- Photo consultation + quote within 24 hours
- On-site visit to measure, inspect substrate, confirm tile selection
- Pool drain (full or partial depending on scope)
- Tile removal and substrate prep
- Waterproofing and bonding agent application
- New tile installation with marine-grade thinset
- Grout and sealant
- Cure time, refill, chemistry balance
- Final walkthrough and written warranty
What affects your price
- Pool perimeter (in linear feet for waterline work)
- Tile selection (porcelain < ceramic < glass < custom mosaic)
- Substrate condition (intact vs. needing repair)
- Accessibility (equipment access to pool area)
- Whether coping work is bundled in
Frequently asked questions
- When should I replace my pool tile instead of repairing it?
- If more than 20-25% of your waterline tile is loose, cracked, or missing, replacement is usually more cost-effective than repairing piece by piece. Other signals: grout failure across multiple sections, underlying plaster damage, or you simply want a modern look. We'll give you an honest recommendation during the quote.
- How long does pool tile replacement take?
- A standard waterline retile runs 3-5 days on site. Full pool retile (all walls, steps, waterline) takes 5-10 days depending on pool size and tile complexity. Glass tile and custom mosaics take longer than standard ceramic.
- What tile types do you install?
- Ceramic, porcelain, glass, stone, travertine, and custom mosaics. Glass tile is trending in Orlando remodels — it's durable, doesn't stain with calcium as quickly, and looks premium. Porcelain is the workhorse for Central Florida waterlines.
- Do you drain the pool for a full retile?
- Yes. Full pool tile replacement requires a complete drain. We handle draining, inspection, prep, installation, and refilling. Plan for the pool to be out of service for 7-14 days depending on scope.
Areas we serve
Pool Tile Replacement available throughout the Orlando 50-mile service area.
Need pool tile replacement? Get a free quote.
Send us a photo of your pool, tell us what's going on, and we'll come back with a firm price within 24 hours.